

Dioda is a component that consists elktroda-electrode, called the cathode and anoda. Function is one component that can be used as the flow is reversed, and for the reducer to fectifier. The form of various dioda. There is a form of astigmatism, and the form of a flat circular bearing.
Friday, June 12, 2009
Dioda
Spoel

Spoel often also called the coil wire email. This component can be made yourself or purchased at electronics parts stores. Spoel itself divided into two, namely:
* Spoel ferit, ie, the wind on the reel stem ferit (black iron) on the radio receiver.
* Spoel oscilator email is winding wires of the components oscilator.
Tranformator (transformer)


Tranformator (transformer) is spoel coil with plate-plate. Forms usually have a lot of feet. And the primary coil.
Various transformer (transformer):
* A. Transformer output
* B. Transformer inpt
* C. Modulator transformer
* C. Transformer oscilator
* D. Power transformer
* E. RF transformer
Variabel

Variable / variable condenser. Condenser can use this changed. In receiving (recever) transistor, its function is for frequency transmitter that you want. Kanduktor prepared ssecara flake, in the form of plate plate. Size or capacity that is usually: 0 - 25 PF or 0-500 PF.
There are two types of this form of variable condenser, namely:
* Do not wrap the variable condenser, which is equipped with a tape the rotor and stator => is now rarely used in the radio receiver.
* Wrap the variable condenser, equipped with a shaped rotor and the stator and wrapped with thin plastic material, clear.
Discriminating capacity of the condenser in the variables, namely:
* If open, this means reduced capacity
* If close, meaning that capacity increases
Resistor


Resistor / prisoners, functions as a storm flow of electricity, and the results refine the resulting sound of several components. Resistor is also called werstand. Shape, have two legs, bodynya bracelet cat and have a color that is different. Colors on the bracelet is that this body is as the strength of the code size werstand.
Transistor

Transistor is the electrical component has three legs. Before practice aircraft assembly, then you need to understand is to know the names of the third leg. For the wrong place / install the foot then we will have failed in the assembly. According to the tasks, transistor is divided into two parts, namely the type of transistor NPN and PNP.
1. PNP transistor type
2. PNP transistor type
Potensiometer


Potensiometer are useful for raising and decreasing the sound. Eg on the radio, you can raise and decrease with the only sound plays potensiometer. Use the other is the volume increase. Potensiometer is usually combined with a switch, which shut off the engine and electronics. Components that, in general, so this is also play with the switch. But in the scheme we only know potensiometer only.
Condenser
* 1 F (Farad) = 1,000,000 MFD (Mikrofarad)
* 1 = MFN NF 1000 (nanoFarad)
* 1 = NF 1000 PF (PikoFarad)
Loudspeaker


Loudspeaker electronics component that is responsible for changing the flow of electricity into vibration. Vibration and, if it will be hard to our ears. Loudspeakers have a lot of size from the smallest to the greatest. Inch size is a lot of value and have custody of the manifold. Suppose the size of the loudspeaker 10 inch and 8 ohm







